Going up to the roof to repair a faulty gutter is one of those maintenance jobs that can be a little unpleasant. Sometimes it must be done. If you have A DIY Safety Guide for Emergency Roof and Gutter Repairs, it can make your life easier. If not, here are a few guidelines

An important rule is not to attempt such repairs when it rains or when the roof may have ice or snow on it. Rain and snow may make the the surface dangerous and slippery. Completing this task successfully may require two visits to the problem area and at least one to the hardware store.

To make sure to don’t slip your shoes should have rubber soles. The first climb should be to find the cause of the problem and work on possible solutions. The ladder should be solid and firm. Common problems that you may expect to find include a blocked gutter, some loose fittings or worn out areas in the gutter. Rust or holes are other problems to look for. Inspect the fascia board. If it is rotten or damaged, it will have to be replaced.

Once the problem is identified, make sure one you have all the necessary tools. A harness and anchor system is a good idea. Once you know what is wrong, take stock of what you need and already have. Make the trip to the DIY place to get the rest.

Now repairs may begin. Find a safe and solid spot where you can attach the anchor and make sure it is firmly in place. For a job like this one you need all the help you can get. If you have a friend willing to go up there with you and assist, it will be to your advantage. Not only will it speed up the job, but you will have someone to help when there is any danger of a fall.

Once you are there, make sure to remove any leaves, dirt or other material that may have collected there. This should be done from time to time.

Replace all nails and screws to make sure the gutter will stay in its place. Make sure to fix the it firmly to the fascia board. If you find holes up there, fill them with roofing cement. Speaking of the fascia board, replace it if you see signs of rotting. Overlapping sections should be treated with silicone caulk.

Now ensure that the downspout is firmly connected. Joints must be reconnected and silicone caulk added to make sure there are no leaks.

This is not meant as a complete DIY Safety Guide for Emergency Roof and Gutter Repairs, just as a few guidelines. It may help to keep you safe if you have to carry out repairs.

Get the exclusive inside scoop on emergency roof and gutter repairs now in our complete DIY guide to everything you need to know about Roof repairs London and Gutter repairs London .